Compro Segati Refilati Abete - Legni Bianchi 22; 40; 46; 60 mm Ungheria

  • Domanda
    18234589
  • Data
    2024-03-04
  • Valida fino a:
    2024-08-31

Prodotto

Tipo Segati Refilati
Tipo di specie Resinosi europei
Specie Abete (Picea abies) - Legni bianchi

Specifiche

Volume 100-500 m3 al mese Convertire
Spessore 22; 40; 46; 60 mm  Convertire
Larghezza 90; 95; 110; 120; 135 mm Convertire
Lunghezza 4000; 5000 mm Convertire
Sistema di classificazione Regole standard europee/francesi (CTBA)
Qualità 4
Essicazione essicato a forno (KD)
Descrizione
Size: length 4000-5000 + -10mm, width 95 + 2-0mm, 40 + 2-0mm.
Moisture content: 12 + 0-2%

Closed bowel: intestine, which is in the sawed product, but not visible on either side or side. Up to 10% is allowed

Sawing error: sawing surface sawing caused by sawing. Not allowed.
Saw Trail: Trace caused by protruding saw teeth. Corrosion: the surface is caused by incorrect sawing caused by corrosion. Not allowed.


Hairy surface: the condition of the surface of the sawed product on which the fiber bundles are replaced and protruded. Not allowed.

Deformation: Distortion of sawed products during sawing and / or drying and / or storage. Not allowed.

Bandwidth: longitudinal curvature of sawed product perpendicular to the surface of the board. Not allowed.

Simple bending: single-deformation deformation. Not allowed.


Composite page bias: two or more deformations of alternating curves. Not allowed.

Bending: longitudinal curvature of sawed product perpendicular to the side surface. Not allowed.

Simple lateral curvature: single curve deformation. Not allowed.
Composite lateral curvature: two or more deformations of alternating curves. Not allowed.

Turnout: bending the sawed product along the width of the sheet. Not allowed.

Twisting: Threaded distortion of sawed product longitudinally. Not allowed.
Flat knuckle: the knob on one or both sides of the timber. Larger than 400mm without permissible size limit (for lengthening).

Knot on the side: the knot on one or two sides of the timber. Larger than 400mm without permissible size limit (for lengthening).

Edge: the bush on one of the edges of the timber. Larger than 400mm without permissible size limit (for lengthening).

Round knuckle: a knot with the largest and smallest diameter in diameter
more than 1.5. Larger than 400mm without permissible size limit (for lengthening).

Oval bush: a bush with the largest and smallest diameter diameter of between 1.5 and 4.0
values. Larger than 400mm without permissible size limit (for lengthening).
Longitudinal bush: a bush with the largest and smallest diameter

more than 4.0. Larger than 400mm without permissible size limit (for lengthening).

Laryngeal blade: an edge with the largest and most visible area on the surface
the smallest diameter ratio exceeds 4.0. Larger than 400mm without permissible size limit (for lengthening).

Two-leafed knuckle: two on the same face surface, starting at exactly the same point
winged or elongated bush. Larger than 400mm without permissible size limit (for lengthening).

Crossbow: the same knuckle on the two opposing sides of the timber. Larger than 400mm without permissible size limit (for lengthening).

Unique bush: there are no loose, free surfaces between each bush. Larger

than 400mm without permissible size limit (for lengthening).
Grouped buds: no free-flowing free surfaces between the individual buds. It allowed.

Needle: Round or up to 5 mm in diameter, or oval, healthy, overgrown, or
partially overgrown. It allowed.



Punching knuckle: a knot that is over the cross-sectional area over the surface
¾ part with the surrounding wood. Larger than 400mm without permissible size limit (for lengthening).


Partially overgrown knuckle: a knot that is the cross sectional circumference of the given surface
he grew up in less than ¾ of the wood around him. Larger than 400mm without permissible size limit (for lengthening).

Elongated bush: a bush that has less cross-sectional circumference than the given surface
more than ¼ of the area grew up with the surrounding wood. Larger than 400mm without permissible size limit (for lengthening).

Falling knuckle: dead knuckle that is not firmly attached to the surrounding wood. Larger than 400mm without permissible size limit (for lengthening).

Healthy knuckle: a knot in which no damage is caused by corrosion. Larger than 400mm without permissible size limit (for length

Prezzi e condizioni

Prezzo Chiedi il prezzo
Incoterm DAP - Consegnato Franco destino (nominando il luogo di destinazione) Nazione Ungheria Regione Kecskemét - 6000
Scadenza di consegna Disponibile in più di 30gg dall'ordine
Acquista da: In tutto il mondo

Compratore

Confermo di aver letto e compreso l' Informativa sulla Privacy di Fordaq

Accedendo dichiari di aver letto e accetti integralmente le nostre Avviso legale


Annunci simili
richiesta 26 Jan 2024 12:51

Segati Refilati Cirmolo, Pino Cembra -

Da Schröter Edelholz e.K.
richiesta 15 Mar 2024 10:05

Pino - Legni Rossi

Da IBP Sp. z o.o.
richiesta 07 Feb 2024 10:12

Legno di recupero antico

Da CALLIGARO GIOSUE' INDUSTRIA E COMMERCIO LEGNAMI S.R.L.
richiesta 21 Mar 2024 16:48

tavole larice siberiano

Da CALLIGARO GIOSUE' INDUSTRIA E COMMERCIO LEGNAMI S.R.L.
La valutazione sulla fiducia Fordaq dà un`indicazione della serietà della ditta La valutazione é basata sull`informazione che abbiamo disponibile sull`azienda.

Tipo di informazione sulla quale ci basiamo per la valutazione:

  • Che tipo di contatto abbiamo avuto con questa ditta?
    Numero di contatti telefonici, visita da parte di un nostro commerciale, incontri a fiere.
  • Storia dell`attività della ditta sul sito Fordaq?
  • La ditta ha dei certificati controllati da Fordaq in maniera indipendente?
  • Fordaq ha verificato che la ditta abbia un certificato riconosciuto presso una associazione industriale ( federazione, etc.)
  • questa ditta ha ricevuto raccomandazioni da altri membri?