Vendo Tenonatrici - Altri Yow Cherng YRT-115 Nuovo Taiwan

  • Offerta
    18162450
  • Data
    2021-07-12
  • Stato : L'offerta è stata disattivata.

Prodotto

Tipo categoria Tenonatrici
Categoria Round End Tenoner
Marchio Yow Cherng
Modello YRT-115

Specifiche

Stato della macchina Nuovo
Data della fabbricazione 2018
Volume 1 Convertire
Descrizione
Round End Tenoner (YRT-115)

General Features:

- Built with two tables for higher efficiency operations
- High production rate up to 12PCS per minute
- Pneumatically operated table longitudinal traverse
- Adjustable tenoning width
- The tenon without removing the door, depth can be conveniently adjusted
- Table tilts 20°
- Movable table to save time, and speed can be variable adjustment
- Convenient setup of tenon directions at horizontal, vertical and 45°
- Miter gauge provided on the table allows for cutting bevel tenons
- Oil bushings on the table support and the disk
- Centralized control panel provides convenient operations
- Designed for producing various types of tenon
- Variable table feed speed suits various types of wood material

Convenient Setup of Tenon Direction
Three tenon directions at horizontal, vertical and 45° can be fast changed by turning the positioning disk.
A mechanical meter is provided for high accuracy adjustment of tenon sizes.

Oil-less Bushings
Eliminates the use of lubricator, the table support and the disk are equipped with oil-less bushings.
Manufactured from high tensile copper alloy for long service life, these bushings also feature impact resistance and maximum wear resistance.

Disk Speed Controlled by Frequency Inverter (Optional)
When requested, a frequency inverter can be applied to control disk speed.
It permits variable speed adjustment for various type of wood material.
This device is recommended when cutting plywood, MDF and easily cracked panel.

24T Helical Cutterhead (Optional)
1. Excellent for all soft and hardwood materials
2. 360º cutting
3. Fine chips
4. No tearing
5. Forced chip removing to eliminate repeated cutting
6. Low noise, long service life, insert life up to 120 days
7. 5 years warranty

Cutterhead Structure (Standard)
1. Suitable for medium hardness wood materials
2. Production rate 12PCS per minute
3. Tearing may occur when applying for high hardness wood materials
4. Sharpening frequency is 6-7 days of operation

Variable Cutter Feed Speed
The machine employs two speed regulator knobs to adjust the table feed forward and backward speeds.
Variable feed speeds makes the machine ideal for cutting hard and softwood.

Prezzi e condizioni

Prezzo Su richiesta
Vende a: In tutto il mondo

Venditori

Ci dispiace, ma questo offerta non è più disponibile. Ma va bene!

 Confermo di aver letto e compreso l' Informativa sulla Privacy di Fordaq

Accedendo dichiari di aver letto e accetti integralmente le nostre Avviso legale

Annunci simili
offerta 11 Mar 2024 04:00

Bacci Usato

Da Mercator S.R.L.
offerta 11 Mar 2024 04:00

Bacci Usato

Da Mercator S.R.L.
offerta 07 Mar 2023 04:00

Aldo Berrone Usato

Da Mercator S.R.L.
offerta 11 Mar 2024 04:00

Bacci Usato

Da Mercator S.R.L.
La valutazione sulla fiducia Fordaq dà un`indicazione della serietà della ditta La valutazione é basata sull`informazione che abbiamo disponibile sull`azienda.

Tipo di informazione sulla quale ci basiamo per la valutazione:

  • Che tipo di contatto abbiamo avuto con questa ditta?
    Numero di contatti telefonici, visita da parte di un nostro commerciale, incontri a fiere.
  • Storia dell`attività della ditta sul sito Fordaq?
  • La ditta ha dei certificati controllati da Fordaq in maniera indipendente?
  • Fordaq ha verificato che la ditta abbia un certificato riconosciuto presso una associazione industriale ( federazione, etc.)
  • questa ditta ha ricevuto raccomandazioni da altri membri?