Vendo Prodotti Di Manutenzione

  • Offerta
    18065530
  • Data
    2024-02-22
  • Valida fino a:
    2024-08-20

Prodotto

Tipo Prodotti di Manutenzione

Specifiche

Volume 1000 pezzi al mese Convertire
Descrizione
Impregnation primer is a solution based on linseed oil with the addition of driers. It is a natural product that due to special composition of the highest quality, penetrates deep into the painted objects, providing lasting protection against destructive action of water and climatic influences. FEATURES penetrates deep into the wood increases water resistance of objects painted surface lakes excellent adhesion under max content. VOC is 350g / l and shall comply with Directive 2004/42 / EU (Cat. A / g / SB, 450g / l (2007) 350g / l (2010). USE primer impregnation based on linseed oil is the primer natural and traditional wood impregnation, wood materials, plaster and other porous surfaces before being painted with products oleo-phthalic or synthetic. An important attribute of the product is that it can be applied inside and outside the ***** applied different methods of application: brush, roller, spray pneumatic and hydrodynamics. ASSORTMENTS mat, colorless CERTIFICATES possesses certified PZH (Institute of Hygiene and Public Health): HK / B / ***** TECHNICAL bulk density [g / cm***** for flow cup Ford, d = 4 mm, 20 ° C [s] for air drying ***** ° C, relative humidity [h] 20 24 in-depth look at the film surface mat APPLICATION DETAILS SURFACE wood surface intended application must be clean, even, dry, dust and stains resins or fats may reduce the effectiveness and adherence impregnating. Areas with traces of fat resins or wash solvent extraction nitro or gasoline, then let it dry. Renderings for priming should be clean, durable, dust and resin stains without sand grains can reduce the effectiveness of non-adherent and adherent impregnating how to prepare products: impregnating is ready to use. Before use must be stirred well. For the first coat of primer and to adjust the viscosity during application using flavored gasoline or thinner, oil products manufactured by FFiL phthalic KOREKTON Sniezka SA. APPLICATION: Apply by brush or spray coaches. Application work is carried out when the ambient temperature is above + 10 ° C for first primer coat is advisable to dilute the product for better penetration of the stand if necessary, recommend applying the next layer of POKOST LNIANY IMPREGON undiluted at an interval 24 hours after the first coat. Paints surface oleo-phthalic or synthetic should be applied after absorption total primer on the surface of support, but not earlier than 24 hours at support and environmental + 20 ° C washing gear is made using thinner products oleo-phthalic or gasoline flavored KOREKTON manufactured by FFiL Śnieżka SA tHINNER / DILUTION METHODS oF PAINTING PARAMETERS oF PAINTING viscosity [s] added diluent [%] diameter nozzle gun [mm] pressure jet [MPa] number of layers recommended brush, roller commercial form - - - 1 -2 pneumatic application form commercial - ***** commercial application form hydrodynamics - hydrodynamic -aplicare ***** aggregate company made with Graco PRO 395ST model, Falcon 20: 1 cONSUMPTION SPECIFIC up to 10 m2 / L / layer consumption may vary depending on the application conditions (surface geometry, application method, environmental conditions, surface nature and preparation). COMPATIBILITY Do not mix with other products. Cans PACKING: 1L, 5L, 10L SHELF LIFE 24 months from the date of manufacture, in original packaging with respect Condit - Translated with google

Prezzi e condizioni

Prezzo Chiedi il prezzo
Vende a: Romania

Venditore

anonimo

Confermo di aver letto e compreso l' Informativa sulla Privacy di Fordaq

Accedendo dichiari di aver letto e accetti integralmente le nostre Avviso legale


Annunci simili
offerta 18 Jan 2024 04:00

Materiali Per Verniciare 1 - 1000000 pezzi Spot - 1 volta

Da Weifang Dening Technology & Trade Co., Ltd.
offerta 20 Feb 2023 00:10

Foils 1 - 10000 pezzi Spot - 1 volta

Da Weifang Dening Technology & Trade Co., Ltd.
offerta 25 Feb 2024 04:00

Colle 1 - 10000 pezzi Spot - 1 volta

Da Weifang Dening Technology & Trade Co., Ltd.
offerta 26 Oct 2023 10:18

Foils 1800 - 59400 pezzi Spot - 1 volta

Da FUNELLO S.C.
La valutazione sulla fiducia Fordaq dà un`indicazione della serietà della ditta La valutazione é basata sull`informazione che abbiamo disponibile sull`azienda.

Tipo di informazione sulla quale ci basiamo per la valutazione:

  • Che tipo di contatto abbiamo avuto con questa ditta?
    Numero di contatti telefonici, visita da parte di un nostro commerciale, incontri a fiere.
  • Storia dell`attività della ditta sul sito Fordaq?
  • La ditta ha dei certificati controllati da Fordaq in maniera indipendente?
  • Fordaq ha verificato che la ditta abbia un certificato riconosciuto presso una associazione industriale ( federazione, etc.)
  • questa ditta ha ricevuto raccomandazioni da altri membri?