Rivestimenti Per Esterni In Legno Pino Siberiano

  • Offerta
    18205505
  • Data
    2024-03-28
  • Valida fino a:
    2024-04-27

Prodotto

Tipo Rivestimenti per Esterni in Legno
Materiale principale Legno massiccio
Tipo di legno massello Resinosi europei
Specie Pino Siberiano
Origine Finlandia

Specifiche

Volume 1 - 100 m3 al mese Convertire
Spessore 26 mm  Convertire
Larghezza 68 mm Convertire
Lunghezza 2000-6000 mm Convertire
Qualità A/B or C Grade
Descrizione
Thermo wood is dimensionally stable, resilient and entirely ecological with higher resistance against biological pests, our facade profiles are made from pine harvested in Finland.
Processing: Thermo wood supplied by us is made using a WTT method during which the wood is treated at 180°C.
• No chemicals are used during the thermal treatment. Only a little bit of water is needed to start the process. The rest takes place thanks to a gradual increase of temperature inside of a pressurized chamber (7–9 bars). Continuous heating of the wood releases moisture and creates an environment full of steam that ensures even colouring and treatment of the forest. Thanks to this process, the wood is environmentally friendly and doesn’t endanger surrounding fauna. • Before the actual thermal treatment, the wood is pre-dried to 12–14% of moisture content. An essential part of the WTT process is that the wood is never dried out completely. On the contrary, the remaining moisture content stays at 6–8%. This is the final humidity for thermo– wood. • Modern technology controls the entire manufacturing process and thereby guaranteeing a uniform treatment of the forest. Thanks to this treatment, the pine changes its original naturally light yellow tone to a bright dark colouring. • The wood obtains significantly improved dimensional stability and thereby reducing the woods vulnerability to deformation respectively swelling and shrinking of the wood. Dimensional changes are reduced by up to 60%.
• The wood shows increased resistance to rot and mould and also improved insulation properties.
Coat and colour If you opt for treating your thermo–wood decking with a coat to prevent it from naturally turning grey (occurs approx. 1 year after installation) we recommend to use OSMO Decking oil n. 010 Thermo–wood oil. OSMO Decking oil is a coat based on natural plant oils and waxes, and thanks to these materials are this coat not harmful to health in any way. The pigment contained in this coat doesn‘t cause any significant change in the natural tone of the thermo–pine, on the contrary, the sound gets even more enhanced and furthermore the wood is protected from the UV rays that are the leading cause of the woodturning grey. Do not however put the coat on any sooner than three months after installation. During these three months, the wood will naturally lose some of the substances within, and it will finish stabilizing after the thermal treatment.
Wood density Approx. 510 – 550 kg/m3.
We supply facade profiles from Thermo pine, according to ČSN EN 14519.

Prezzi e condizioni

Prezzo Su richiesta EUR per m Convertire
Incoterm EXW - franco fabbrica (venditore) Nazione Repubblica Ceca Regione Prague
Scadenza di consegna Disponibile in meno di 30gg dall'ordine
Vende a: In tutto il mondo

Venditore

 
Membro Platinum
7°   Anno

Confermo di aver letto e compreso l' Informativa sulla Privacy di Fordaq

Accedendo dichiari di aver letto e accetti integralmente le nostre Avviso legale


Annunci simili
offerta 20 Mar 2024 15:41

Legno Massiccio Larice Siberiano Rivestimenti Per Esterni In Legno

Da AU-MEX Ltd.
offerta 25 Mar 2024 07:08

Legno Massiccio Larice Rivestimenti Per Esterni In Legno

Da ZHENGZHOU WOODLIFE CO., LTD
offerta 20 Mar 2024 15:41

Legno Massiccio Larice Siberiano Rivestimenti Per Esterni In Legno

Da AU-MEX Ltd.
offerta 05 Mar 2024 14:41

Legno Massiccio Larice Siberiano Rivestimenti Per Esterni In Legno

Da AU-MEX Ltd.
La valutazione sulla fiducia Fordaq dà un`indicazione della serietà della ditta La valutazione é basata sull`informazione che abbiamo disponibile sull`azienda.

Tipo di informazione sulla quale ci basiamo per la valutazione:

  • Che tipo di contatto abbiamo avuto con questa ditta?
    Numero di contatti telefonici, visita da parte di un nostro commerciale, incontri a fiere.
  • Storia dell`attività della ditta sul sito Fordaq?
  • La ditta ha dei certificati controllati da Fordaq in maniera indipendente?
  • Fordaq ha verificato che la ditta abbia un certificato riconosciuto presso una associazione industriale ( federazione, etc.)
  • questa ditta ha ricevuto raccomandazioni da altri membri?